Selection assistance loading ramps
Ramps are indispensable when driving your car, motorbike or other heavy machine onto an elevation. However, if you need to move your wheelchair or mobility scooter over a raised threshold, Kruizinga.com is also the right place to go to. We have a wide range of highly robust ramps.
How do I calculate the correct length of the ramps?
In most cases, we recommend a maximum gradient of 30% for standard ramps. You can calculate the required length of the ramps using the following formula: Ramp height (cm) divided by the maximum gradient angle (30) x 100 = length of the ramp. See also the table below for an overview;
Example
If a vehicle has to be loaded on a trailer with a ramp height (floor height) of 45 cm and a gradient of 30%, calculate the length of the ramp as follows;
45 ÷ 30 x 100 = 150 cm
If you require a lower gradient, change the figure 30 that appears in the calculation above, to your preferred percentage.
How do I calculate the total load capacity? Total weight of the vehicle + fuel (1L = 1KG) + weight of the driver + weight of the accessories We recommend that you add on at least 10% extra load capacity. |
Load capacity
As stated for the products, the load capacity depends on several factors and decreases if:
- the weight distribution is different than 2/3 on one axle and 1/3 on the other axle.
- the speed is above 5 km/h.
- there are vibrations when accelerating or braking abruptly.
What else do you need to pay attention to?
- the ramps must be stored completely flat on the bottom of the trailer or loading area and secured in such a way that they can't move about.
- always reverse onto a ramp if a vehicle has most of its weight on the rear axle. This prevents the vehicle from tipping backwards.
Threshold aid
Our threshold ramps can be used for a wide range of applications and are suitable for both indoor and outdoor use. The threshold aids are suitable for use in logistics, in the office, in healthcare or general use. Our range includes;
- compact folding threshold ramps
- fixed threshold ramps
- cable ramps
- kerb ramps
- solid rubber ramps.
Ramps for trucks, agricultural vehicles, construction machinery or other heavy-duty vehicles
We are also able to supply you with safe and solid ramps for heavy vehicles. In order to load and/or unload a heavy vehicle, you will require the correct specifications. For example, the axle spacing, wheel spacing, tracks or normal tyres, with overhang, type of suspension, etc.
Complete range
In addition to ramps we also supply; straps, corner protectors, protective blankets, non-slip mats, trailer nets, covers, locks and aluminium boxes for storing and securing of your materials. These accessories help to increase your load capacity, facilitate handling and protect valuable cargo, goods and products. Our load securing products are mainly used in the transport and logistics sectors, but also in the construction, industry, hospitality and agricultural sector.
Tailor-made
We supply standard ramps and threshold ramps directly from stock. However, we are also able to provide you with a tailor-made solution; our specialists will be happy to help. This could be, for example, a wheelchair ramp or a ramp or a ramp with a specific size.
Can't find the product you are looking for or need some advice?
If you would like advice about the various access ramps in our range or the service that we offer you, you can contact us by telephone or by email with your questions about straps. We will be happy to help you find the right ramp!
Are you undecided?
Please feel free to contact us!